Tips on How to Drain a Toilet 

Draining a toilet seems to be a simple thing to do but it is quite tricky. If the toilet is stopped up or not, the method for how to drain a toilet is completely different. It may also be a good reason to remove it if the toilet is stopped up. To clear the blockage or run a snake, many people will remove the toilet.  

Drain a Toilet

You can rotate the toilet upside down and remove anything that may block or lodged them. It is difficult to remove unless you drain it first when the toilet is stopped up. Replacing your toilet with a new fixture is another reason to drain a toilet.  

Since you will need to get all the water out before you carry it through your house, it is essential that the toilet is drained before removing it. Depending on the situation, stopped up or not some methods will work better.  

However, if you are not confident enough to do this job, you can always ask assistance from plumbing companies such as Plombier Montréal that offers professional plumbing services and guarantees customer satisfaction at all times.  

Well if you think you can do this job without assistance from professional plumber then here are some tips on how to drain a toilet that will surely help you. 

     Plunge Out The Water 

Whether it is stopped or not, it is true that plunging is a great way to remove the water from the toilet bowl. Because of the plunging motion, the water is pushed out of the toilet bowl and down the drain. By turning off the stop valve to the water supply for the toilet, you can shut the water off.  

You can then slowly flush the water from the tank to the bowl and dip to remove that water all way out of the toilet bowl before removing the toilet. 

    Siphon Out The Water 

To siphon out the water from the tank or bowl, a short hose can be used. You can do this by completely filling up the hose with water then plunge one end with your thumb. The next thing that you will is to drop the other end into the toilet bowl then get the hose lower than the bowl and release your thumb. 

As long as you keep your end lower compared to the bowl, it will begin draining and will do so. You must remember that if the toilet is stopped up, this will not work so well. 

    Bail Out The Water 

To bail out the water out of a toilet bowl, you can use a small cup or small bowl. In order to get the majority of the water out of the bowl, a small cup or even the cap of a hairspray bottle or paint container will do. 

    Sponge Out The Water 

To remove all of the water from a toilet, using a good sponge is a great way. The sponge can remove all the water from the trap since it can easily fit around everything in the tank and can also fit way down into the bowl. 


Basic Types of Pipes Used in Plumbing

Since you have a choice of several kinds of pipe, doing your own plumbing can be quite a confusing experience. You will have a hard time to choose because they can blend together. When the choice was limited to galvanized pipe or galvanized pipe, the answer isn’t a clear as it may have been in the past few years. Here are the types of pipes that can be found at home. 



This is found in supply lines and suitable to be done even if without the help of professionals. This type of pipe is flexible; color coded and has truly delivered water supply plumbing. PEX is simple to join and easy to cut. It yields to logic since it can make 90-degree curves with ease. Plumbing supply lines with PEX is easy for most homeowners. 

    PVC- Polyvinyl Chloride 

Found in drain and vent lines. Because it is lighter and much easier to work compared to traditional galvanized steel pipes, PVC pipe has been a very big deal in the industry of plumbing for the last few decades. 

For drain or waste pipes, as well as stacks, you will generally be using PVC pipe. Because it requires little more than a hacksaw, miter box, and solvents which will eventually stick the pipe together, this makes it very easy to install. 

On the white surface of the pipe, the diameters are clearly marked. Diameter can be determined using a sizing tool such as Pi-piper if you are not able to easily read the mark. 

    Rigid Copper 

Mainly found in supply lines and is also known as the water supply pipe. Using a hacksaw or a special tube cutter, you can easily cut this type of pipe. As it requires a practiced hand to solder copper together, a connection is a different matter. Because it does that carry the health risk that PVS has, a rigid copper pipe is great for water supply. 


Except that it is black, this pipe looks exactly like PVC pipes. It is often not allowed anymore by plumbing codes because it is the older version of PVC. Just like PVC, it is also used to drain vent and drain pipes. The best thing that you can do is to replace with PVC if you are working with ABS. 

    Flexible Copper Tubing 

For short runs, flexible copper is used. In tight spots, you can see it leading up to your water heater or for cold water supply. Using a hacksaw, you can easily cut a flexible copper tube and bent to fit around the corners of your home. Flexible copper tubing is not recommended for exterior use because it cannot stand up well to extreme temperatures.  

    Galvanized Steel 

The pipe of popular imagination is the galvanized steel. When you think of a plumbing, it is the pipe that comes into your mind. With each end of the pipe threaded, it is made of galvanized steel. Using connecting joints, individual pipes are screwed into each other.